• Model NO.：WLFM
• Application：Artificial Leather, Paper, Coating, Aluminum, Non Woven, Fabric
• Coil THK：0.3~0.5
• Coil Width：1250
• Roller of Pressure Roller：300mm
• Roller of Embossing Roller：280mm
• Shaft Dia.：80mm
• Roller Material of Pressure Roller：#45
• Roller Material of Embossing Roller：40cr
• Embossing Depth of Min THK：0.5mm
• Embossing Depth of Max THK：0.1mm
• HRC：55-60
• Transport Package：Wooden Cases
• Specification：CE& ISO9001
• Trademark：WILLINGIN′T
• Origin：China
• Production Capacity：20set,Mouth

Basic Info.

Model NO. WLFM Application Artificial Leather, Paper, Coating, Aluminum, Non Woven, Fabric Coil THK 0.3~0.5 Coil Width 1250 Roller of Pressure Roller 300mm Roller of Embossing Roller 280mm Shaft Dia. 80mm Roller Material of Pressure Roller #45 Roller Material of Embossing Roller 40cr Embossing Depth of Min THK 0.5mm Embossing Depth of Max THK 0.1mm HRC 55-60 Transport Package Wooden Cases Specification CE& ISO9001 Trademark WILLINGIN′T Origin China Production Capacity 20set/Mouth

Product Description

Levering-Cutting Machinery
 
    We can fabricate this kind of machine.
1) uncoiler with 5 tons;
2) pinch roller,
3) cut to length system,
4) encoder which cut automatically, and controlled by PLC (Mitsubishi brand).
5) product support table, 
1)Today we checked with our engineers, they said we could make the working speed in your requirement --- 7.5tons/ hour. We can make the improved type of this machine. But the machine frame will be changed accordingly; meantime the cost of machine will be increased.
For 7.5 tons/ hours, 7500 kgs / 60 minutes = 125 kgs/ minute, if you use 0.5mm thick steel coil, 125 / density 7.85 / width 1 /  thickness 0.5= 31.8 m; therefore, you mean 31.8m / minute, all right? We have confirmed with engineers, they said we could frabricate this speed type. 
But we need hydraulic(powered) decoiler for 5 tons now, we can't use passive / manual / unpowered decoiler. Then we could meet the speed of 7.5 tons/ hour.
2)But notice, it still has shortage, if speed up, the thickness of cutting only can be min. 0.20mm, not like yours 0.13mm. So our range of cutting is 0.20~0.80mm. 
As to 0.13mm thick steel sheet, we can cut, but not guarantee quality. Supposing you cut steel sheet lower than 0.20mm, the cutting blades need to maintain it usually, ward off wear and tear. The precision of cutting should be very high. You need employ a very good technician to take care of this machine as well, if you cut lower than 0.20mm. 
We suggest you use 0.20~0.80mm this range. Speed 7.5 tons/ hour, we are sure we could make it, you could inspect the machine after finished.       
3)Price of machine: 1) regular type: 18m/ minute, 0.25~0.80mm, USD 15,000 per complete set, FOB Shanghai (unpowered uncoiler).
2)  improved type: 35m/minute, 0.20~0.80mm, USD 17,000 per complete set, FOB Shanghai (unpowered uncoiler).
35m/minute, 0.20~0.80mm, USD 27,000 per complete set, FOB Shanghai (powered uncoiler, type 5tons, no coil car).


About the machine,we need you to provide us informaton.
1. profile drawing and size of product (model), 
2. steel thickness range,
3. coil width,
4. steel stress, 
5. requirements for configuration.
  For price and other details, we welcome you to inquire us We are a manufacturer in Chinawe can make the purlin machine as per as your request   
Please Contact Miss. Lucy