• Model NO.：JRX
• Specification：customerized
• Trademark：JRX
• Origin：China

Basic Info.

Model NO. JRX Specification customerized Trademark JRX Origin China

Product Description

Technical requirement

Main products	High strength Corrugated Paper
Paper width	100-200g/m
Capacity	120t/d
Net paper width	3600mm
Wire width	4200mm
Working speed	300m/min
Design speed	350m/min
Gauge	4700 mm
Roll of dynamic balance	G2.5
Cylinder of dynamic balance	G4
Batch-off roll of dynamic balance	G1.6
Drive mode	AC motor variable frequency speed regulation segment drive
Layout of floor	Monolayer
Pattern	Left hand machine
Banner moisture difference	≤±1%
Banner quantitative difference	≤±1.5%

 

Brief Introduction

1. Net paper width is 3600mm, is mainly used for making high strength corrugated paper. The paper machine is mainly divided into the following parts: Headbox, Fourdrinier Wire Section, Press Section, Front Dryer Section, Sizing Machine, Back Dryer Section, Reeling Section.

2. Headbox:

Air-cushion headbox, by controlling the gas pressure inside the headbox to control and stabilize the pulping pressure head.

3. Wire Section:

Single fourdrinier wire, the main components: breast roll, forming plate, dehydration board, vacuum box, vacuum couch roll, wire-driving rollers, wire-guiding roll and rack, etc, and equipped with a piece of forming wire.

4. Press Section:

It is divided into 1st press, 2nd press. 1st press is the press with large diameter roll with a vacuum suction roller, equipped with two coating metal rollers, and with upper felt and lower felt; 2nd press is large diameter roll, equipped with two coating metal rollers, and with upper felt and lower felt. 1st press, 2nd press are equipped with leading felt roller and felt suction box. 1st press, 2nd press pressurized way is oil hydraulic cylinder pressure.

5. Front Dryer Section:

Φ1800 dryer cylinder, group drive, each group with dryer wire, wire-guiding roll. Equipped with semi-enclosed gas hood.

6. Beveled Surface Sizing Machine:

Equipped with a surface chrome-plated metal roller, a coating metal roller. The surface sizing press machine pressurized way is corrugated tire pressure.

7. Back Dryer Section:

Φ1800 dryer cylinder, group drive, each group with dryer wire, carrier roll. Equipped with semi-enclosed hood.