Post-Press Equipment

UV Screen Printing Curing Conveyor Dryer

Shenzhen Tamprinter Printing Machinery Co., Ltd.
  • Transport Package:Plywood
  • Specification:4000*1540*1550mm
  • Trademark:Tamprinter
  • Origin:Guangdong, China

Base Info

  • Model NO.:TM-UV750B
  • HS Code:8443192290
  • Production Capacity:100 Sets,Month

Description

TYPETM-UV750BConvey belt width (mm)730Effective range (mm)750Max thickness of cured (mm)40Conveying speed (m)2~20Power(P/V/Hz)3/380/50UV lamp (KW*pcs)5.6*2Driving power (W)90Total power
(KW)12.1Size (L*W*H)2550*1050*1450Weight (Kg)350Lamp length826

TM-UV750B UV curing machine  2.55m*1.05m*1.45m  
Plywood 2.7m*1.2m*1.8m   about 6m³
input 850+shade 200+tunnel 700+shade 200+output 550=2500mm
Distance from Handrail to ground 820mm
Distance from belt to ground 790~810mm can be adjusted
Belt 4900*730mm
Machine picture:UV Screen Printing Curing Conveyor Dryer

Uv machine Features: 

1. With Teflon or stainless steel net, transmit speed steady and can be adjusted.

2. With two UV lighting tubes, can turn on the light according to the need.

3. Wink-dry make the surface of the stocks high hardness and rub resistance.

4. Tunneling-based make the whole machine light barrier good and without harm.

5. Equipped with powerful nether induced draughe system and big intake airway, can absorbs the stock on the mesh belthard. It can be used with production line and other equipment easily.

1.1.2uv machine General safety regulation
Before you haven't complete read and understood this operation handbook, don't try to operate machine. If user doesn't operate machine as the handbook, it may cause fire, electricity-touch or more serious person injury accident. Operator should always read this handbook, so as to keep persistent safety operation.

1. Know your machine
For your personal safety, read this handbook carefully .User should be familiar with the machine application and limitation and the potential danger with the machine.
2. Keep the working area clean
Messy working area and messy worktable will cause accident.
3. Don't use in machine in dangerous environment
Don't use machine in wet or raining place, or expose it in rain. Keep the working area in good illumination.
4. Non-professional keep away
All visitors must keep distance with machine in working area.
5. Don't forced operate machine
Let machine work safe under the designed speed. Use the correct instrument, don't use the machine by force or add device to work.
6. Wear suitable clothes.
Forbid wear loose clothes, glove, necklace, bracelet or jewelry. Suggest wear slip-preventing shoes, or hat to wrap long hair.
7. Don't maintain the machine when it is running 
The machine should be maintained properly, such as lubricating and adjustment, but cannot be maintained when it with electricity and running.

8. Before maintenance or changing spare parts or motor installation or reinstallation, the machine's electrical source must be cut off
9. If replace the spare parts ,please keep the model same as the original one. 
10. Running foster care
Don't run the machine without foster care. When the operator leaves, machine should be turned off.

Production workshop:
UV Screen Printing Curing Conveyor Dryer

FAQ:
When machine in working have problem how to deal with it. Answer: Please sent us email first and tell us what the problem is. This is the standard machine, it's performance is very nice.
Even have question those will be below question. you can check first by yourself.
Q1, UV light can not light on.
A1: Check the electricity have connect in to machine. The indicator of power will showed red light. Than operate as manual showed.
Q2, UV light on, Belt stopped not run.
A2: Turn on the lamp quickly and waiting for machine power off automatically. (Our machine have function Only need turn off light the machine will turn off automatically.) Than Check the Motor of conveyor which under the unloading side of belt. If this question replace a new one. Check the Speed control: Change a new one if the new one worked. We will shipment a extra speed controller Marched with the machine when we package in each shipment.
Q3, The light twice again and gain than not light.
A3: Check your power supply is 220V +/_5% 50HZ, If Below 220V over the range of +/-5%, so keep your power supply steady. (our standard, any diffrent will be the machine we signed in purchase).
Q4, The light can not dry completely to product ( UV ink, UV glue,UV varnish, UV coating and so on)
A4: The lamp average lifetime is 800hours. if over this pls replace a new one. (We suggest when you purchase our UV machine, also purchase a new extra lamps as replacement) If a new lamp, than check the ignitor, transformer, and lamp they connect line is well connected. Especially the lamp line. there is screw in, if it is loosen. pls stick it lightly.
If find any parts need replacement , than within one year Guarantee we supply by free.
Also you can purchase a new one out of Guarantee.
We supply all parts of our machine. including: UV lamp, Transformer, Capacitor, Trigger, ignitor, reflector, Quartz, adapter, Phase protector, speed control, Speed motor, Exhausting fun, Air out tube ......
Welcome to contact us if any question.

1.1.1   UV machine's additional safety regulation

11.  Machine' electrical wire should be ground correctly .

12.  Before work,please make sure the follow things :Whether the power source is connected and whether the lamps' height is suitable. Check all parts whether the locking screws and handles are tightened. Check whether the electrical source' three phase wires are connected correct. The method is: open the electrical source, try to run the conveying roller and check whether the running direction of the conveying roller is correct. 

13.  Check whether the cooling fan work normally and shield board' working situation ,

14.  Pay attention to adjust the feeding speed.

15.  Choose the proper paint thickness .It is difficult to dry if the thickness is too thick.

16.  The static created by machine' high pressure will attract lots of dust which should be cleaned before every operation.

17.  The are high voltage in the machine, so user should often check the machine's insulation capability to avoid creep age accident. Before checking, user should discharge the capacitance.

18.  UV radiation can cause a strong physical injury to human eyes. During work or maintenance, do not let the ultraviolet radiation irradiate on the human body, do not see it direct by eyes. 

1.1.1 UV machine electronic control system safety rules

19. Only staff through formal training and with expertise can carry out electrical maintenance and troubleshooting
21. Before start-up, read and pay attention to warning signs.
22. When troubleshooting confirmed, we must cut off the power supply.
23. Note humid areas, to prevent the occurrence of electric shock.
24. Before the electric power is sent to the any equipment, the people must left.
25. Do not open the electrical box, unless there is a need to check the electrical equipment.
26. Do not amend circuit, unless authorized by the manufacturers. 
27. When replacement of electrical parts, should first ensure whether they meet the specifications, including the wires' color-coded.
28. Do not wear metallic glasses, necklaces, during the electrical equipment running; In addition, do not wear rings, watches, bracelets.

1.2 uv machine 's Warning signs (fig/photo)

1,There are follow warning signs on the machine to ensure the correct and safety operation.
2,These signs on machine will indicate the dangerous point which will cause danger to the operator .
3,Ensure to remember these signs and arouse others attention when it is necessary .
4,Don't remove any safety signs from the machine.
5,Safety signs identification

  The Uv machine  interpretation of signs 
1. (No fire and smoke)--During the machine running,it is possible to create flammable and easy exploding gas, so forbid smoking in the machine' workshop . Otherwise it is easy to cause fire accident.
2. ((Prohibition touch)----Forbid touch any running parts by hand when machine is running 
3. (Caution electric shock)--People cannot touch any electriferous part when the machine with electricity, or there is danger of electric shock. 
4. (Emergency stop)--If there are emergency occur,press this button immediately, then whole machine will stop to prevent the state of affairs more serious . 
5. (Caution rollers)--Hands may be wrapped in the place where rollers and gears running ,
6. (Caution ultraviolet radiation)--UV lamps give off the ultraviolet radiation which will hurt the human body and eyes serious.
7. (Guard glass)--Protect the eyes from the ultraviolet radiation.
8. (Grounding protect)--Should check the grounding protect's continuity and effect. 
9. (Rotation direction )--Point out correct rotation direction of motor. 
10. (Lubricating)--Add lubrication to the gear reduction termly.

2.1 UV machine's working principle & function and feature
Working principle:
UV (Ultraviolet) is an ultraviolet light. In the application of curing, mainly through the irradiation of the ultraviolet, making the sensitive material generates polymeric cross-linking reaction, so that the ink achieves the purpose of drying and curing in a short time.

Comparison with the traditional self-drying and infrared drying, UV (Ultraviolet) has the quality of high gloss, high hardness, high wear resistance and solvent resistance, etc. on its cured products. It is very adapt to high-end packaging products, such as frosted, wrinkles, refraction, ice flowers, foam, polishing and so on.

Uv machine Function and feature:
1. Well-designed cooling system reduces the heat generated by the light source, so as to avoid high temperature leaving some products (such as paper, PVC film) affected and deformed.
2. Electronic variable speed, speed is stable, sensitivity is adjustable.
3. High quality light source, long operating life, it can start instantly and access to normal brightness quickly.
4. Good stability and good environmental adaptability. During the use, energy output evenly, and after the prolonged uses, there is no significant change in the spectral distribution.
5. Strong exhaust pump makes the article adsorbed on the conveyor belt, and difficult to drift and fall.

2.2 Uv machine Model and machine nameplate 
Model compilation method in accordance with the People's Republic of China National Standard GB 12448-90 (compilation method of printing machinery model)as YF6113 for example, the meaning is as follows: 
YF6113 ---- YF means this equipment belonging to printing auxiliary class, 61 represents the dryer, 13 represents its largest processing width.

CE:
UV Screen Printing Curing Conveyor Dryer
Customer visit:
UV Screen Printing Curing Conveyor Dryer
Shipping picture:
UV Screen Printing Curing Conveyor Dryer
You might also like:
UV Screen Printing Curing Conveyor Dryer