UV Curing Machine for Trademark Printing and Drying
Dongguan Lan Dun mechanical and electrical equipment Technology Co., Ltd.- Effective Illumination Width:550mm
- UV Lamp Height:50~120mm(Adjustable)
Base Info
- Model NO.:LDUVJ-1D-6KW
- Power Supply:Designated UV Stepless Dimming Power Supply
- Belt Width:550mm
- Conveyor Belt Material:Stainless Steel Chain Plate
- Transfer Speed:Adjustable 1~8m,Min
- Power:6kw
- Cooling Way:Fan Cooling
- Cabinet Color:Bright Silver
- Power Wiring:Three-Phase 380VAC 50Hz
- Feed End Length:450mm
- Discharge End Length:500mm
- High Inlet and Outlet:250mm
- UV Furnace Length:1000mm
- Transport Package:Wooden Case
- Specification:2000mm*800mm*1600mm
- Trademark:UVTANG
- Origin:China
- HS Code:8543709990
- Production Capacity:5sets,Week
Description
L2000mm*W800mm*H1700mmReflector housing Polished aluminum reflector housing with imported reflective aluminum sheets UV Lamp Height The distance between the lamp and the conveyor belt is 50-250mm (adjustable) Conveyor belt material 650mm The stand is made of aluminum and can be raised and lowered.Adjustable height:630-880mm. The height and angle of the distance between the UV lamp and the conveyor belt can be adjusted.The power of the UV lamp is not adjustable. Control panel:Start switch,Indicator light,Conveyor switch,Fan switch,Temperature digital display,Individual control switch for the lamp,Hour meter Safety equipment:Leakage circuit breaker detection,Prevention of over-temperature,Fan motor overload protection,Abnormal emergency switch,Control circuit insurance,Power reverse protection Note:Can be customized according to customer requirements
Applicable industry
This machine is suitable for UV-sensitive coatings, inks, bonding agents, bonding, injection molding or printing surfaces of various materials to cure and dry instantly.
1. Printing: Widely used in screen printing, lithography, letterpress printing, self-adhesive trademarks, metal nameplates, PC, PVC, ABS, PS, acrylic, Trondo, glass, ceramics, electronic parts, single-sided circuit boards, etc.
2. Coating: Bright coating on wood surface,Bright paper,Plastic floor tiles,PU into leather bright,Fiber optic line surface coating.
3. Bonding: Bonding of circuit board CHIP parts,Bonding of various electronic parts and glass,Bonding of liquid crystal film and terminal sealant
Performance characteristics
· easy to operate, one of the batch production models, the selected components are standardized, simple operation and maintenance, low cost;
· excellent UV light source made in China with good stability;
· reasonable circulation exhaust design, lower suction structure, even the thin sheet, will not drift, the cooling effect is good;
· stepless speed regulation is adopted, and the speed can be freely set within the effective range.
Product pictures
Our service
1.Provide pre-sale and after -sale technical consultation.
2.Provide 24 hours consultations technical support after sale.
3.Provide technical support for training technicians.
4.Provide technical consultation and support for mechanical equipment.
5.Provide UV equipment configuration improvement , installation proposal technical support.
6.In general, door-to-door service is not supported.If door-to-door service is required, a round-trip fee for personnel is required.
7.Normal use of the machine quality problems limited free warranty for 1 to 5 years, lifelong maintenance services, parts of the parts of the supplier to provide free on-site service.
Applicable industry
This machine is suitable for UV-sensitive coatings, inks, bonding agents, bonding, injection molding or printing surfaces of various materials to cure and dry instantly.
1. Printing: Widely used in screen printing, lithography, letterpress printing, self-adhesive trademarks, metal nameplates, PC, PVC, ABS, PS, acrylic, Trondo, glass, ceramics, electronic parts, single-sided circuit boards, etc.
2. Coating: Bright coating on wood surface,Bright paper,Plastic floor tiles,PU into leather bright,Fiber optic line surface coating.
3. Bonding: Bonding of circuit board CHIP parts,Bonding of various electronic parts and glass,Bonding of liquid crystal film and terminal sealant
Performance characteristics
· easy to operate, one of the batch production models, the selected components are standardized, simple operation and maintenance, low cost;
· excellent UV light source made in China with good stability;
· reasonable circulation exhaust design, lower suction structure, even the thin sheet, will not drift, the cooling effect is good;
· stepless speed regulation is adopted, and the speed can be freely set within the effective range.
Product pictures
Our service
1.Provide pre-sale and after -sale technical consultation.
2.Provide 24 hours consultations technical support after sale.
3.Provide technical support for training technicians.
4.Provide technical consultation and support for mechanical equipment.
5.Provide UV equipment configuration improvement , installation proposal technical support.
6.In general, door-to-door service is not supported.If door-to-door service is required, a round-trip fee for personnel is required.
7.Normal use of the machine quality problems limited free warranty for 1 to 5 years, lifelong maintenance services, parts of the parts of the supplier to provide free on-site service.