Post-Press Equipment

Thin Film/ Paper/ Surface Treatment/ Coating Machine

Shandong Tongri Power Science and Technology Co., Ltd.
  • After-sales Service:Global Lifelong After-Sales Service for Free
  • Warranty:1 Year
  • Type:Roll Coater
  • Driven Type:Mechanical
  • Automatic Grade:Automatic
  • Packaging Material:Paper

Base Info

  • Model NO.:TR
  • Packaging Type:Layer
  • Application:PE
  • Production Type:40-80g Thermal Base Paper, Offset Book Paper, etc
  • Net Paper Width:1760mm
  • Polyester Mesh Width:2100mm
  • Design Speed:150m , Min
  • Working Speed:100-130m , Min
  • Track Gauge of Paper Machine:2600mm
  • Transmission Mode:AC Variable Frequency Partial Transmission
  • Outline Size:Length 41.2m, Width 7.1m, Height 5.6m
  • Total Power:205kw
  • Transport Package:Container
  • Specification:50 tons
  • Trademark:Tongri
  • Origin:China
  • HS Code:8439200000
  • Production Capacity:1 Set, 3 Month

Description

Basic Info.

Model NO. TR Packaging Type Layer Application PE Production Type 40-80g Thermal Base Paper, Offset Book Paper, etc Net Paper Width 1760mm Polyester Mesh Width 2100mm Design Speed 150m / Min Working Speed 100-130m / Min Track Gauge of Paper Machine 2600mm Transmission Mode AC Variable Frequency Partial Transmission Outline Size Length 41.2m, Width 7.1m, Height 5.6m Total Power 205kw Transport Package Container Specification 50 tons Trademark Tongri Origin China HS Code 8439200000 Production Capacity 1 Set/ 3 Month

Product Description

Thin film/ paper/ surface treatment/ Coating machine


Product details

Thin Film/ Paper/ Surface Treatment/ Coating Machine
Thin Film/ Paper/ Surface Treatment/ Coating Machine
Thin Film/ Paper/ Surface Treatment/ Coating Machine

Brief introduction of structure
The machine is composed of mesh part, pressing part, drying part before sizing, sizing machine, drying part after sizing, calender, QCS detection, coiling part, transmission part, foundation part and other general equipment.

 1. Long net partIt is composed of stage expanding headbox, chest roll, forming plate, dehydrating plate, water suction tank, watermark roll, vacuum couch roll, driving net roll and couch roll paper loss pool. The length of net case (that is, the distance from chest roll center to vacuum couch roll center) is 10083mm, and the height of net case is 1630mm.2. Press sectionThe pressing part is composed of a double blanket press, a blanket water squeezing press device, a frame, a tensioner, a corrector, a water suction tank, a water spray pipe, etc. the pressing lower roller uses a lower blanket, and the pressing upper roller shares a blanket with a cylinder of idler.
 3. Dry part before sizingThe drying part is composed of a Φ 3000mm drying cylinder and a Φ 2500mm drying cylinder.

4. 
Sizing machine: the inclined type sizing machine is adopted, which is mainly composed of two rollers, frame and pressure device.
Rubber surface roller: Φ 400 × 2000mm, steel pipe covered with rubber. 1 pieces
Chrome roller: Φ 400 × 2000mm, steel tube chrome plating. 1 pieces
Paper guide roller: Φ 159 × 2000mm, steel tube chrome plated. 2 pieces
Pressurization device: adopt Φ 400mm corrugated air tube for one-way pressurization and self weight pressure relief.
The design line pressure is 40kN / m, and the working line pressure is 20-30kn / m.

5. 
Drying part after sizing
This part is mainly composed of movable arc roller, drying cylinder, dry net tensioner, corrector, guide roller, steam cover, etc.

6. 
Soft calendering 1 set
Upper roll: hot roll is metal roll Φ 550 × 2100mmLower roll: the surface of soft roll is polyurethane roll surface with diameter of Φ 550 × 2100mm and air tire is pressurized.

7. 
Horizontal winder 1 set
Roll cylinder: Φ 600 × 2100mm outer circle polished, equipped with movable arc roller.

8. 
Compressed air system: the system is only used for control panel and gas consumption point pipeline. Others, such as main pipeline, gas storage tank and compressed air station, shall be provided by the user, but the air pressure shall not be less than 0.7MPa.

9. Thin oil lubrication system: this system provides thin oil lubrication for the bearing of cylinder block and closed gear box. It is equipped with integral thin oil station and oil supply distributor with nominal volume of 2.5m3 and maximum working pressure of 0.63Mpa. Only the pipeline from the distributor to each oil consumption point is provided, and other oil supply and return pipelines are provided by users.

10. Transmission part

The machine adopts AC variable frequency drive, with a total of 10 transmission points and a total power of 200.5kw.

11. B
ase component
The foundation part includes foundation drawing and foundation plate.



About us


Thin Film/ Paper/ Surface Treatment/ Coating Machine

· We are a professional manufacturer
· We have almost 30 years machinery manufacturing and processing experience
· Advanced technology, processing method, excellent product quality and high-level service




Product advantage

· We focus on high level equipment manufacturing
· supported by digit control and industrial automation technology
· We encourage our engineering staff to be creative at all times
· We have 7 senior technician and the team have nearly 20 national intellectual property patents (includes 4 invention patents)and it is still growing
· Our managing team has more than 20 years experience
· We focus on high-end products, highest standard of this industry




Main product
Paper cone machine
Paper tube machine
Paper making machine
Corrugated carton machine
Paper cone making machine
Fireworks paper cone machine
Textile paper cone machine
Parallel paper tube making machine
ZK-24 Gantry type drilling and tapping machine
High speed gantry type CNC drilling machine
CNC boring and milling machine
Intelligent production line
Manipulator

Robot